LOGIC CONTROLS OPOS CUSTOMER DISPLAYS ===================================== 8/17/2007 V2.0 This OPOS driver supports our OPOS model pole displays and table displays. Following models are supported: PD3900 TD3900 PD3800 TD3800 LD9900 LT9900 LD9800 LT9800 PD6000 Please make sure that the display being used is one of the above models. All 3 types of hardware interfaces (Serial, Parallel & USB) are supported. For models PD3800, TD3800, LD9800 and LT9800, make sure that LCI command set is loaded into the display. If you have the USB interface OPOS display, please install USB driver first before installing the OPOS drivers. OPOS DRIVER INSTALLATION ------------------------ 1. The Logic Controls OPOS display drivers come in a CD. Either copy all files in the CD into a harddisk folder or use the CD directly for installation. 2. Click on file to start installation and follow instructions on the screen to go through installation. 3. After installation, you have to setup the OPOS driver by running PDSetup.exe. Start under Start Menu -> Programs -> LC OPOS -> Setup. The left part of the dialog window is for setting up OPOS and the right part is for testing commands sent to the OPOS display. 4. Select appropriate port and then setup LDN (Logic Device Name). Click Add new LDN. A new form will be displayed, name a new LDN. For example: "LD9". Then click OK. 5. To rename an LDN or delete an LDN, click Rename LDN or Delete LDN. 6. To test the pole display, follow the order of buttons. First click "Open", then "Claim", then "Enable Device". Now the pole display is ready to display messages. 7. Click on "DisplayText", a string is displayed on the pole display. Test other functions to verify operations. 8. Click on "Release" and then "Close". Click on "Exit" to quit the program. The OPOS driver has been setup and ready to run OPOS application softwares. 9. If you have any problems with the drivers after installation, check with the file which should be in the directory you have installed LCI OPOS drivers. Logic Controls, Inc. 355 Denton Avenue New Hyde Park, NY 11040 Tel: (516)-248 0400 Fax: (516)-248 0443 email: lci@logiccontrols.com web: www.logiccontrols.com