SB9015F
Easily Replacing the Hard Disk Drive
To replace the hard disk drive:

  1. Position the LCD panel facing up and remove the connectors cover.
  2. Press both sides of the HDD clip inwards to release lock. Then pull the HDD out from the slot.
  3. Replace the hard disk drive with a new one. Then follow the above-mentioned steps in reverse to finish the replacement.

SB9015F
Removing the System Core Engine for Maintenance (For Advanced Users Only)
To remove the main board:

  1. Position the LCD panel facing up and remove the connectors cover.
  2. Detach all connected cables.
  3. Loosen the captive screw that secures the main board onto the touch terminal.
  4. Pull the main board out from the compartment.